VM600 200-510-041-021 保护卡

【产品详情】

主要特性和优点

– 型号： VM600 200-510-041-021 保护卡

特征

16个动态通道和4个转速通道

每个动态通道和每个双通道多20个处理输出(每个xmc 16 12个)

利用异步(固定频率)或同步(顺序跟踪)采样在所有通道上同时采集数据

24位数据采集，高信噪比数据处理，高分辨率FFT高达每500 ms 6400行

专为与VibroSight软件配合使用而设计

燃烧状态监控模块用于监测燃烧的状态，是燃烧安全系统的重要组成部分。

燃烧状态监控模块的工作原理是利用传感器采集相关参数，例如火焰的亮度、燃烧时的声音等，再通过数据处理和分析，判断出燃烧的状态，从而对燃烧过程进行监控，如果发现异常或危险，会立即发出警报。

燃烧状态监控模块的应用范围很广，不仅可用于各种燃烧设备，例如锅炉、窑炉等，也可以用于监测燃烧安全。

Product Specifications:

 Features

16 dynamic channels and 4 RPM channels

Up to 20 processing outputs per dynamic channel and per dual channel (12 per xmc 16)

Capture data simultaneously on all channels using asynchronous (fixed frequency) or synchronous (sequential tracking) sampling

24-bit data acquisition, high signal-to-noise ratio data processing, high-resolution FFT up to 6400 lines per 500 ms

Designed to work with VibroSight software

 Combustion status monitoring module is used to monitor the status of combustion and is an important part of the combustion safety system.

The working principle of the combustion status monitoring module is to use the sensor to collect relevant parameters, such as the brightness of the flame, the sound of burning, etc., and then through data processing and analysis, determine the combustion status, so as to monitor the combustion process, if abnormal or dangerous is found, it will immediately issue an alarm.

The combustion status monitoring module has a wide range of applications, not only for various combustion equipment, such as boilers, kilns, etc., but also for monitoring combustion safety.

• Vibro-meter 200-510-041-021 200-510-111-021 VM600 MPC4

• Vibro-meter 200-510-071-113 200-510-111-034 VM600 MPC4

• Vibro-meter 600-003 620-001-001-116 VM600 XMV16

• Vibro-meter 200-560-000-016 200-560-101-015 VM600 IOC4T

• Vibro-meter 200-560-000-018 200-560-101-015 VM600 IOC4T

• Vibro-meter 620-002-000-113 620-003-111-112 VM600 XIO16T

• Vibro-meter 200-566-000-012 200-566-101-012 VM600 IOCN

• Vibro-meter VM600-ABE040 204-040-100-011

• Vibro-meter VM600-ABE040 204-040-100-011

• Vibro-meter 200-595-100-014 200-595-072-122 VM600 CPUM

• Vibro-meter 600-003 620-001-001-116 VM600 XMV16

• Vibro-meter 620-002-000-113 620-003-111-112 VM600 XI016T

• Vibro-meter 200-560-000-016 200-560-101-015 VM600 IOC4T

• Vibro-meter 200-560-000-113 200-560-101-017 VM600 IOC4T

• Vibro-meter 200-566-000-012 200-566-101-012 VM600 IOCN

​