VIBRO 200-560-000-113 VM600 振动监测器

【产品详情】

主要特性和优点

– 型号：VIBRO 200-560-000-113 VM600

特征

16个动态通道和4个转速通道

每个动态通道和每个双通道多20个处理输出(每个xmc 16 12个)

利用异步(固定频率)或同步(顺序跟踪)采样在所有通道上同时采集数据

24位数据采集，高信噪比数据处理，高分辨率FFT高达每500 ms 6400行

专为与VibroSight软件配合使用而设计

VIBRO 200-560-000-113 VM600燃烧状态监控模块用于监测燃烧的状态，是燃烧安全系统的重要组成部分。

燃烧状态监控模块的工作原理是利用传感器采集相关参数，例如火焰的亮度、燃烧时的声音等，再通过数据处理和分析，判断出燃烧的状态，从而对燃烧过程进行监控，如果发现异常或危险，会立即发出警报。

燃烧状态监控模块的应用范围很广，不仅可用于各种燃烧设备，例如锅炉、窑炉等，也可以用于监测燃烧安全。

Product Specifications:

Model: MPC4 200-510-076-114

 Features

16 dynamic channels and 4 RPM channels

Up to 20 processing outputs per dynamic channel and per dual channel (12 per xmc 16)

Capture data simultaneously on all channels using asynchronous (fixed frequency) or synchronous (sequential tracking) sampling

24-bit data acquisition, high signal-to-noise ratio data processing, high-resolution FFT up to 6400 lines per 500 ms

Designed to work with VibroSight software

MPC4 200-510-076-114 Combustion status monitoring module is used to monitor the status of combustion and is an important part of the combustion safety system.

The working principle of the combustion status monitoring module is to use the sensor to collect relevant parameters, such as the brightness of the flame, the sound of burning, etc., and then through data processing and analysis, determine the combustion status, so as to monitor the combustion process, if abnormal or dangerous is found, it will immediately issue an alarm.

The combustion status monitoring module has a wide range of applications, not only for various combustion equipment, such as boilers, kilns, etc., but also for monitoring combustion safety.

​