WT1010
WT1010
WT1010
WT1010
WT1010
☆☆☆ 联系人：刘锦玲 ☆☆☆
☆☆☆ 手 机：15359273791（微信同号）☆☆☆
☆☆☆ Email: sales5@xrjdcs,com ☆☆☆
☆☆☆ Email: sales5@xrjdcs,com ☆☆☆
由厦门兴锐嘉进出口特 价 销 售！！
日本横河电机株式会社(YOKOGAWA)作为一个全球著名的测量、工业自动化控制、和信息系统的领导者，
一直致力于为用户提供尖端的专业技术，支援顾客进行提高经营效率的改革，为产业的发展作出了贡献。
〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓
Number of corridors: 8. ● signal type: contact output. ● Load: 250V/5a. ● SCAN CYCLE: interrupt. ● ISOLATION VOLTAGE: Network Isolation 1500V; Channel Isolation 400V. Communication Interface: CAN2.0A protocol. ● Communication parameters: 4kbps/12kbps. : : Communication Distance: 10 Km. ● Communication medium: Ordinary twisted pair ● outer size: 135X58X28MM ● working power supply: 24VDC/1w. Working Environment: temperature-20 ~ 70 °C, humidity ≤85% RH network connect all WT400 series one-wire communication module support standard CAN communication network, CAN bus is bus topology network, namely "One" Font Network, does not support star connection, the branch line length of the network shall be less than 1 meter. Can Bus is a multi-host network, there are many hosts, each communication device on the network is a node, the maximum number of nodes per network is 63. The network has a length of 10 km (without relays) , impedance matching resistors of 120 ohms at each end, and the communication medium is Shielded Twisted Pair. WT400 series CAN bus network connects WT461 and WT462 modules with upper computer, converts CAN bus to RS232 and RS485 bus, supports MODBUS protocol, WT400 series module uses the same as FCS900 series after WT461 and WT462 modules. Note: The ground of each one-wire pass module is connected with the network shield line, and the whole network shield line is selected to connect the earth.
〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓
一直致力于为用户提供尖端的专业技术，支援顾客进行提高经营效率的改革，为产业的发展作出了贡献。
〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓
Number of corridors: 8. ● signal type: contact output. ● Load: 250V/5a. ● SCAN CYCLE: interrupt. ● ISOLATION VOLTAGE: Network Isolation 1500V; Channel Isolation 400V. Communication Interface: CAN2.0A protocol. ● Communication parameters: 4kbps/12kbps. : : Communication Distance: 10 Km. ● Communication medium: Ordinary twisted pair ● outer size: 135X58X28MM ● working power supply: 24VDC/1w. Working Environment: temperature-20 ~ 70 °C, humidity ≤85% RH network connect all WT400 series one-wire communication module support standard CAN communication network, CAN bus is bus topology network, namely "One" Font Network, does not support star connection, the branch line length of the network shall be less than 1 meter. Can Bus is a multi-host network, there are many hosts, each communication device on the network is a node, the maximum number of nodes per network is 63. The network has a length of 10 km (without relays) , impedance matching resistors of 120 ohms at each end, and the communication medium is Shielded Twisted Pair. WT400 series CAN bus network connects WT461 and WT462 modules with upper computer, converts CAN bus to RS232 and RS485 bus, supports MODBUS protocol, WT400 series module uses the same as FCS900 series after WT461 and WT462 modules. Note: The ground of each one-wire pass module is connected with the network shield line, and the whole network shield line is selected to connect the earth.
〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓〓
我公司现列卡件备件以供参考:
NEW MELTRIC 17-64200 RECEPTACLE CONNECTOR 15A 20P DN20C
NEW MODICON QUANTUM 490NAE91100 PROFIBUS TAP 12MBIT/S TAP 12MBIT/S
TELEMECANIQUE LU2B32BL REVERSING STARTER POWER BASE
MITSUBISHI A2ACPUP21-S1 CPU MODULE 1024 I/O 6K MEMORY
ALLEN BRADLEY 2098-DSD-005-DN ULTRA 3000 AC DRIVE
NEW FENWAL SERIES 400 TEMPERATURE CONTROLLER 40-703010-425
FANUC BOARD A16B-2200-002
PYLE NATIONAL 322-RA-A RECEPTACLE 60 AMP 600 AC VOLTS
SANYO DENKI SAN DRIVER PDT-203G-19N SERVO DRIVE
SQUARE D 8501X040 AC CONTROL RELAYS SER A
本公司还供应上述产品的同类产品：DSQC全系列,ABB，AB，西门子，施耐德
有需要随时可联系：♥♥♥♥15359273791 ♥♥♥♥刘锦玲
客服1